? 2013 ixys corporation, all rights reserved symbol test conditions maximum ratings v dss t j = 25 c to 150 c - 50 v v dgr t j = 25 c to 150 c, r gs = 1m - 50 v v gss continuous + 15 v v gsm transient + 25 v i d25 t c = 25 c - 48 a i dm t c = 25 c, pulse width limited by t jm -150 a i a t c = 25 c - 48 a e as t c = 25 c 300 mj p d t c = 25 c 150 w t j -55 ... +150 c t jm 150 c t stg -55 ... +150 c t l 1.6mm (0.062 in.) from case for 10s 300 c t sold plastic body for 10s 260 c m d mounting torque (to-220) 1.13 / 10 nm/lb.in. weight to-252 0.35 g to-263 2.50 g to-220 3.00 g ds100293a(01/13) symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. bv dss v gs = 0v, i d = - 250 a - 50 v v gs(th) v ds = v gs , i d = - 250 a - 2.0 - 4.5 v i gss v gs = 15v, v ds = 0v 50 na i dss v ds = v dss , v gs = 0v - 10 a t j = 125 c - 250 a r ds(on) v gs = -10v, i d = 0.5 ? i d25 , note 1 30 m trenchp tm power mosfets p-channel enhancement mode avalanche rated IXTY48P05T ixta48p05t ixtp48p05t v dss = - 50v i d25 = - 48a r ds(on) 30 m features z international standard packages z avalanche rated z extended fbsoa z fast intrinsic diode z low r ds(on) and q g advantages z easy to mount z space savings z high power density applications z high-side switching z push pull amplifiers z dc choppers z automatic test equipment z current regulators z battery charger applications preliminary technical information to-252 (ixty) g s d (tab) g = gate d = drain s = source tab = drain to-263 aa (ixta) g s d (tab) g d s to-220ab (ixtp) d (tab)
ixys reserves the right to change limits, test conditions, and dimensions. IXTY48P05T ixta48p05t ixtp48p05t ixys mosfets and igbts are covered 4,835,592 4,931,844 5,049,961 5,237,481 6,162,665 6,404,065 b1 6,683,344 6,727,585 7,005,734 b2 7,157,338b2 by one or more of the following u.s. patents: 4,860,072 5,017,508 5,063,307 5,381,025 6,259,123 b1 6,534,343 6,710,405 b2 6,759,692 7,063,975 b2 4,881,106 5,034,796 5,187,117 5,486,715 6,306,728 b1 6,583,505 6,710,463 6,771,478 b2 7,071,537 note 1: pulse test, t 300 s, duty cycle, d 2%. symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. g fs v ds = -10v, i d = 0.5 ? i d25 , note 1 16 26 s c iss 3660 pf c oss v gs = 0v, v ds = - 25v, f = 1mhz 495 pf c rss 215 pf t d(on) 20 ns t r 15 ns t d(off) 30 ns t f 13 ns q g(on) 53 nc q gs v gs = -10v, v ds = 0.5 ? v dss , i d = 0.5 ? i d25 16 nc q gd 21 nc r thjc 0.83 c/w r thcs to-220 0.50 c/w source-drain diode symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. i s v gs = 0v - 48 a i sm repetitive, pulse width limited by t jm -192 a v sd i f = i s , v gs = 0v, note 1 -1.5 v t rr 30 ns q rm 43.4 nc i rm - 2.8 a resistive switching times v gs = -10v, v ds = - 30v, i d = 0.5 ? i d25 r g = 3 (external) i f = 0.5 ? i d25 , -di/dt = -100a/ s v r = - 25v, v gs = 0v pins: 1 - gate 2 - drain 3 - source to-220 outline to-263 outline 1. gate 2. drain 3. source 4. drain dim. millimeter inches min. max. min. max. a 4.06 4.83 .160 .190 b 0.51 0.99 .020 .039 b2 1.14 1.40 .045 .055 c 0.40 0.74 .016 .029 c2 1.14 1.40 .045 .055 d 8.64 9.65 .340 .380 d1 8.00 8.89 .280 .320 e 9.65 10.41 .380 .405 e1 6.22 8.13 .270 .320 e 2.54 bsc .100 bsc l 14.61 15.88 .575 .625 l1 2.29 2.79 .090 .110 l2 1.02 1.40 .040 .055 l3 1.27 1.78 .050 .070 l4 0 0.13 0 .005 to-252 outline pins: 1 - gate 2,4 - drain 3 - source dim. millimeter inches min. max. min. max. a 2.19 2.38 0.086 0.094 a1 0.89 1.14 0.035 0.045 a2 0 0.13 0 0.005 b 0.64 0.89 0.025 0.035 b1 0.76 1.14 0.030 0.045 b2 5.21 5.46 0.205 0.215 c 0.46 0.58 0.018 0.023 c1 0.46 0.58 0.018 0.023 d 5.97 6.22 0.235 0.245 d1 4.32 5.21 0.170 0.205 e 6.35 6.73 0.250 0.265 e1 4.32 5.21 0.170 0.205 e 2.28 bsc 0.090 bsc e1 4.57 bsc 0.180 bsc h 9.40 10.42 0.370 0.410 l 0.51 1.02 0.020 0.040 l1 0.64 1.02 0.025 0.040 l2 0.89 1.27 0.035 0.050 l3 2.54 2.92 0.100 0.115 preliminary technical information the product presented herein is under development. the technical specifications offered are derived from data gathered during objective characterizations of preliminary engineering lots; but also may yet contain some information supplied during a pre-production design evaluation. ixys reserves the right to change limits, test conditions, and dimensions without notice.
? 2013 ixys corporation, all rights reserved IXTY48P05T ixta48p05t ixtp48p05t fig. 1. output characteristics @ t j = 25oc -48 -44 -40 -36 -32 -28 -24 -20 -16 -12 -8 -4 0 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 v ds - volts i d - amperes v gs = -10v - 9v - 5 v - 6 v - 4 v - 7 v - 8 v fig. 2. extended output characteristics @ t j = 25oc -180 -160 -140 -120 -100 -80 -60 -40 -20 0 -30 -25 -20 -15 -10 -5 0 v ds - volts i d - amperes v gs = -10v - 6 v - 7 v - 5 v - 8 v - 9 v - 4 v fig. 3. output characteristics @ t j = 125oc -48 -44 -40 -36 -32 -28 -24 -20 -16 -12 -8 -4 0 -2 -1.8 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 v ds - volts i d - amperes v gs = -10v - 9v - 6v - 5v - 4v - 7v - 8v fig. 4. r ds(on) normalized to i d = - 24a value vs. junction temperature 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 -50 -25 0 25 50 75 100 125 150 t j - degrees centigrade r ds(on) - normalized v gs = -10v i d = - 48a i d = - 24a fig. 5. r ds(on) normalized to i d = - 24a value vs. drain current 0.9 1.1 1.3 1.5 1.7 1.9 -140 -120 -100 -80 -60 -40 -20 0 i d - amperes r ds(on) - normalized v gs = -10v t j = 25oc t j = 125oc fig. 6. maximum drain current vs. case temperature -55 -45 -35 -25 -15 -5 -50 -25 0 25 50 75 100 125 150 t c - degrees centigrade i d - amperes
ixys reserves the right to change limits, test conditions, and dimensions. IXTY48P05T ixta48p05t ixtp48p05t fig. 7. input admittance -60 -50 -40 -30 -20 -10 0 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 v gs - volts i d - amperes t j = 125oc 25oc - 40oc fig. 8. transconductance 0 5 10 15 20 25 30 35 40 -70 -60 -50 -40 -30 -20 -10 0 i d - amperes g f s - siemens t j = - 40oc 25oc 125oc fig. 9. forward voltage drop of intrinsic diode -160 -140 -120 -100 -80 -60 -40 -20 0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 v sd - volts i s - amperes t j = 125oc t j = 25oc fig. 10. gate charge -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 0 5 10 15 20 25 30 35 40 45 50 55 q g - nanocoulombs v gs - volts v ds = - 27.5v i d = - 24a i g = -1ma fig. 11. capacitance 100 1,000 10,000 -40 -35 -30 -25 -20 -15 -10 -5 0 v ds - volts capacitance - picofarads f = 1 mh z c iss c rss c oss fig. 12. forward-bias safe operating area 1 10 100 1,000 1 10 100 v ds - volts i d - amperes t j = 150oc t c = 25oc single pulse 10ms 1ms r ds(on) limit 100ms dc - - - - - - - 100s 25s
? 2013 ixys corporation, all rights reserved IXTY48P05T ixta48p05t ixtp48p05t fig. 14. resistive turn-on rise time vs. drain current 13.0 13.5 14.0 14.5 15.0 15.5 16.0 -48 -46 -44 -42 -40 -38 -36 -34 -32 -30 -28 -26 -24 i d - amperes t r - nanoseconds r g = 3 ? , v gs = -10v v ds = - 30v t j = 25oc t j = 125oc fig. 15. resistive turn-on switching times vs. gate resistance 8 10 12 14 16 18 20 22 24 26 3456789101112131415 r g - ohms t r - nanoseconds 18 19 20 21 22 23 24 25 26 27 t d ( on ) - nanoseconds t r t d(on) - - - - t j = 125oc, v gs = -10v v ds = - 30v i d = - 24a, - 48a fig. 16. resistive turn-off switching times vs. junction temperature 11 12 13 14 15 16 17 18 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t f - nanoseconds 24 26 28 30 32 34 36 38 t d ( off ) - nanoseconds t f t d(off) - - - - r g = 3 ? , v gs = -10v v ds = - 30v i d = - 48a, - 24a fig. 17. resistive turn-off switching times vs. drain current 23 26 29 32 35 38 41 -48 -46 -44 -42 -40 -38 -36 -34 -32 -30 -28 -26 -24 i d - amperes t f - nanoseconds 11 12 13 14 15 16 17 t d ( off ) - nanoseconds t f t d(off) - - - - r g = 3 ? , v gs = -10v v ds = - 30v t j = 25oc, 125oc fig. 13. resistive turn-on rise time vs. junction temperature 13.5 14.0 14.5 15.0 15.5 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t r - nanoseconds r g = 3 ? , v gs = -10v v ds = - 30v i d = - 24a i d = - 48a fig. 18. resistive turn-off switching times vs. gate resistance 5 10 15 20 25 30 35 3 4 5 6 7 8 9 10 11 12 13 14 15 r g - ohms t f - nanoseconds 10 20 30 40 50 60 70 t d ( off ) - nanoseconds t f t d(off) - - - - t j = 125oc, v gs = -10v v ds = - 30v i d = - 24a i d = - 48a
ixys reserves the right to change limits, test conditions, and dimensions. IXTY48P05T ixta48p05t ixtp48p05t ixys ref: t_48p05t(a2)10-18-10 fig. 19. maximum transient thermal impedance 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 10 pulse width - seconds z (th)jc - oc / w
|
